You send ether (ETH) by entering the recipient's Ethereum address in your wallet, choosing an amount, and confirming. The network charges a gas fee, paid in ETH, which has typically been a cent to a few cents for a simple transfer during 2026. Most transfers land in the next block, about 12 seconds later.
Send in the Bitcoin.com Wallet app:
- Open the Bitcoin.com Wallet app, select your Ethereum wallet, and tap Send
- Paste or scan the recipient's address, or enter their
.ethname - Enter the amount in ETH or your local currency, and check the network fee
- Review the details and slide to confirm
Key Takeaways
- Sending ETH needs the recipient's address, which starts with
0x, the amount, and enough ETH to pay the gas fee on top. - Gas is always paid in ETH, including when you send tokens such as USDT or USDC. A wallet holding tokens but no ETH cannot move them.
- During 2026, Ethereum mainnet gas has mostly sat below 1 gwei, putting a basic ETH transfer at around a cent. Token transfers use about three times as much gas as ETH transfers.
- The same
0xaddress works on Ethereum, Polygon, BNB Smart Chain, Avalanche, and other EVM networks. Sending on the wrong network is the most common Ethereum sending mistake. - A transfer usually confirms in the next block, about 12 seconds, and becomes final after roughly 13 minutes. Exchanges credit deposits after their own number of confirmations.
- Confirmed Ethereum transactions cannot be reversed. Check the address after pasting, and never copy an address from your transaction history.
- The Bitcoin.com Wallet offers three fee presets plus a custom option, and accepts
.ethnames as well as0xaddresses.
How Long It Takes and What It Costs
Sending ETH follows the same pattern as sending Bitcoin, with two differences that matter in practice: gas is priced per unit of computation, and Ethereum produces blocks far more often.
| Ethereum (ETH) | Bitcoin (BTC), for comparison | |
|---|---|---|
| Fee for a basic transfer in 2026 | Typically a cent to a few cents | Often a dollar or two |
| What the fee depends on | Gas used × gas price | Transaction data size × fee rate |
| Time between blocks | 12 seconds | About 10 minutes |
| When a payment is considered final | About 13 minutes | Commonly after about six blocks, roughly an hour |
| Address format | 0x followed by 40 characters | 1, 3, bc1q, or bc1p |
According to ethereum.org, standard gas sat around 0.15 gwei in early May 2026, with daily averages near 0.5 gwei through April, which puts a basic transfer at under a cent to a few cents depending on the ETH price. Fees fell as most activity moved to Layer 2 networks, which the Dencun upgrade made far cheaper in March 2024, and as block capacity grew. The gas limit doubled from 30 million to 60 million during 2025, a level the Fusaka upgrade set as the default when it activated on December 3, 2025. Fees can still spike during periods of heavy demand.
What Different Transactions Cost
Gas measures computational work, and every action uses a set amount:
| Action | Gas used |
|---|---|
| Sending ETH | 21,000 |
| Approving a token for an app | About 46,000 |
| Sending an ERC-20 token such as USDT | About 65,000 |
| A swap on a decentralized exchange | About 180,000 |
Your fee is the gas used multiplied by the gas price, which is quoted in gwei, a billionth of an ETH. The gas price itself has two parts under EIP-1559: a base fee set by the network and burned, plus an optional tip to the validator. The mechanics of how ETH gas works explain why a busy network pushes the base fee up.
What an Ethereum Address Looks Like
An Ethereum address is 0x followed by 40 letters and numbers:
0xab41b92c6d43f4b7a670b65479f5bb809646602e
Many wallets display it in mixed upper and lower case, which works as a built-in checksum against typos. Addresses can also be shown as a QR code, or replaced by a human-readable name ending in .eth if the recipient has registered one. On the recipient's side, an Ethereum wallet keeps one address per account, so the address someone gives you today is usually the same one they gave you before.
How to Send ETH in the Bitcoin.com Wallet
- From the home screen, tap your Ethereum wallet, then tap Send.
- Enter the destination. You can paste an address, enter a
.ethname, scan a QR code, choose an address you saved earlier, or send to another of your own ETH wallets. - Enter the amount, in ETH or your local currency.
- To change the fee, tap the Network fee icon at the top left of the amount screen and choose one of the three presets, or set a custom fee.
- Tap Continue, review the address, amount, and fee, then slide to send.
After sending, the app shows a summary with the amount, the destination, and whether the transaction is pending or confirmed. Tapping the transaction hash opens it on Etherscan, a public Ethereum block explorer, where you can follow it until it is final. You can also save the address for next time, share a record of the payment, or add a personal note.
Custom fees suit experienced users who check current gas prices first, for example on Etherscan's gas tracker. Setting the tip too low can leave a transaction waiting, and the presets already adjust to current network conditions.
Sending Tokens on Ethereum
Tokens such as USDT, USDC, and other ERC-20 tokens live at your Ethereum address alongside your ETH, and you send them the same way: select the token in your Ethereum wallet, tap Send, and follow the same steps.
Three points catch people out:
- You still need ETH. The gas for a token transfer is paid in ETH, not in the token. Keep a small ETH balance in any wallet that holds tokens.
- Token transfers cost more gas. At about 65,000 gas, a token transfer costs roughly three times as much as sending ETH.
- Never send tokens to the token's own contract address. Every token has a contract address, which you may see on its information page. It is not a place to deposit funds, and tokens sent there are usually lost.
Sending ETH from an Exchange
On an exchange, sending is usually called Withdraw. Choose ETH, paste the destination address, and pick the network carefully. Exchanges often offer several networks for ETH and for stablecoins, including Ethereum mainnet and Layer 2 networks, and the cheapest option on the exchange is not necessarily one the recipient's wallet supports.
Exchanges set their own withdrawal fees, which can be well above the network fee. A self-custodial wallet sends directly to the network, so you pay only the gas itself.
Sending on the Right Network
Ethereum addresses are valid on every network built on the Ethereum Virtual Machine (EVM). The same 0x string can receive funds on Ethereum, Polygon, BNB Smart Chain, Avalanche, and many Layer 2 networks, and nothing in the address tells you which one the recipient expects.
| Network | Gas paid in | Supported in the Bitcoin.com Wallet |
|---|---|---|
| Ethereum | ETH | Yes |
| Polygon | POL | Yes |
| BNB Smart Chain | BNB | Yes |
| Avalanche C-Chain | AVAX | Yes |
| Layer 2 networks such as Arbitrum, Base, and Optimism | ETH | Check before sending |
Ask the recipient which network to use before you send, and confirm that your wallet or exchange is sending on that network. Funds sent on the wrong EVM network are not destroyed. They sit at the same address on the other network, and whoever controls that address's key can usually reach them by opening a wallet for that network with the same recovery phrase or key. When the address belongs to an exchange, recovery depends on the exchange.
Mistakes to Avoid When Sending ETH
| Mistake | What happens | How to avoid it |
|---|---|---|
| Sending on the wrong network | The funds arrive at the same address on a different network | Confirm the network with the recipient before sending |
| Holding tokens but no ETH | The wallet cannot pay gas, so the tokens cannot move | Keep a small ETH balance alongside any tokens |
| Copying an address from your transaction history | Scammers plant look-alike addresses in your history with tiny or zero-value transfers | Always copy the address from the recipient directly, or use your saved addresses |
| Clipboard malware | Malware swaps a copied address for the attacker's | Check the first and last several characters after pasting |
| Sending tokens to a token contract | The tokens are usually unrecoverable | Send only to the recipient's wallet address |
| Sending a large amount in one go | Any mistake costs the full amount | Send a small test first, confirm it arrives, then send the rest |
The look-alike address trick, known as address poisoning, is especially common on Ethereum and other EVM networks, where planting a fake entry in someone's history costs very little. It works only on people who copy addresses from their own transaction list, and the same discipline protects against the wider set of crypto fraud patterns that rely on a rushed send.
If a Transaction Is Stuck or Fails
Ethereum processes each account's transactions in order. If one goes out with too low a fee, it can wait in the queue, and later transactions from the same wallet wait behind it. Many wallets offer a speed-up option that resends the same transaction with a higher fee, or a cancel option that replaces it with a zero-value transaction to yourself at a higher fee. At 2026 gas levels, this rarely happens with the wallet's preset fees.
A transaction that interacts with a smart contract can also fail outright, for example if a token transfer is rejected by the token's rules. A failed transaction still uses gas, because validators did the work to process it. A basic transfer of ETH to an ordinary address almost never fails.
Conclusion
Sending ETH takes an address, an amount, and a small gas fee paid in ETH. In 2026 that fee is typically a cent or a few cents, the transfer usually lands within seconds, and it becomes final after about 13 minutes. Most mistakes come from two features unique to Ethereum: gas is always paid in ETH, so token holders need some ETH too, and one address works across many EVM networks, so the network has to match what the recipient expects. Copy addresses from the recipient and never from your history, check them after pasting, and test large transfers with a small amount first.






